Skip to content

People: guide

Help release c4e6d48f22a45602 · Generated 22 November 2026. Online at docs.mycadesk.in/modules/people/.

Help explains how the software works and is not professional advice; refer to the statute or notification.

People - time, leave, attendance and articles

The people module: timers and weekly timesheets, leave, attendance, payroll export, the article register, joiner and leaver checklists, skills, and work patterns and holidays. People are listed by name, never ranked.

The people module looks after the firm's own people: their time, leave, attendance, articleship and skills. Each part is switched on for the firm separately, so you may not see all of them.

Warning

Team views show what was recorded, not performance. People are listed by name; there is no sort, rank, score, "top" or "bottom" anywhere in the module.

Time

Approved billable time on engagements goes to billing as work in progress, unless the firm has switched that off.

Leave and attendance

Articles, joiners and skills

Settings and messages

The firm's choices are listed in . Common messages: , , , and .

Approve, return or reopen timesheets

Approvers see the submitted weeks of the people in their scope, by name. Approve (one by one or up to 50 at once), return with a reason, or reopen an approved week that is not billed.

Timesheet approvals lists the submitted weeks you may decide: those of people in your people scope, or where you are the named approver. Your own week never appears. The same items appear in Decide what is waiting for you in Approvals.

Review a week

Open a week to see its lines and Daily totals. A line on a client you cannot see shows only the date, time and category as Restricted client; it still counts in the totals.

  • Approve the week. On the list you can select several weeks and approve up to 50 at once; each is checked on its own.
  • Return the week with a reason of at least 10 characters. The member sees your reason and the week comes back to them as a draft.
  • Reopen the week after approval, with a reason. A week whose time has been billed cannot be reopened; correct it with an adjusting entry instead.

Approved billable engagement time is sent to billing automatically (unless your firm switched this off). If sending fails, it is retried every hour; the approval stands.

Warning

Hours are time recorded, not performance. Do not use them to compare people.

Ask for leave and check your balance

See your balances under the firm's leave policy, ask for leave with a live day count, cancel a request, and read the ledger that makes up each balance.

Leave shows your balances, your requests and your ledger. Leave policies are written by your firm and are labelled "firm-authored, not platform-verified". If no policy applies to you yet, the page says so; ask HR / Office.

Ask for leave

Steps

  1. Under Ask for leave choose the Leave type, the dates (From and to) and, if useful, a note.
  2. Check the day count. The server works it out from your work pattern and the firm's holidays, including half days.
  3. If you ask for more than your balance, tick Take the days over my balance as loss of pay, or choose Loss of pay as the type.
  4. Send. Your approver is told.

Sick leave asks no reason. Some types are taken in whole days only; the form says so. A Medical certificate can be attached to a request if you have one; it is optional, only you and the firm's partners or owner can open it, and it is deleted 90 days after the decision.

Your requests

My requests lists each request with its state. You can cancel a waiting or approved request; cancelling an approved one gives the days back. Leave in a month that has been exported for payroll cannot change until a partner reopens the month.

Balances and the ledger

Your balance is the sum of the rows in Ledger: credits each month, carry-forward and lapse at the end of the leave year, approved leave and any adjustments by HR / Office (always with a reason). Nothing is edited in place: a correction is a new row. Waiting (days) shows days held by requests still waiting.

Check in and out, and fix a missed check-in

When your firm takes attendance by check-in, check in and out each day and say where you work from. Location is optional and only when the firm switched it on and you agreed.

Attendance works when your firm takes attendance by self check-in. Otherwise the page says "The firm does not take attendance by check-in" and there is nothing to do.

First use

Before your first check-in the firm's privacy notice is shown. Read it and choose I agree.

Check in and out

Steps

  1. Choose where you are Working from: office, remote or client site.
  2. Choose Check in.
  3. At the end of the day choose Check out.

If you forget to check out, the check-in counts until the firm's automatic check-out time and is flagged. This month shows your days with their in and out times and status.

Location (only if your firm switched it on)

The page shows Location: off or Location: recorded at check-in only. If the firm uses location, you are shown its location notice and may agree or decline; declining changes nothing else. With your consent, one position is taken at the moment you check in, never while you work and never at check-out.

My stored check-in points lists your own stored points with the date each is deleted. You can Withdraw my location consent at any time. If the firm changes its notice, your consent ends and you are asked again.

Fix a missed check-in

Choose Fix a missed check-in, pick the Day, enter In (HH:MM) and Out (HH:MM) and a Reason, and send it for approval. Only one request per day can wait at a time. A month exported for payroll cannot be changed until a partner reopens it.

Decide leave requests and attendance corrections

Approvers open a leave request or an attendance regularisation from Approvals, then approve it or return it with a reason. Nobody decides their own request.

Leave requests and attendance regularisations of people in your scope (or where you are the named approver) appear in Decide what is waiting for you in Approvals. Open one to see its details.

Leave request

The page shows the member, the type (approvers and HR / Office only), the days asked for and the member's note. Approve debits the balance at once and updates attendance. Return the leave request needs a reason of at least 10 characters, which the member sees.

Attendance regularisation

The page shows the day asked for, the in and out times, the reason and the check-ins recorded that day with their work mode. While the request waits, an approver in scope or HR / Office may open the day's stored check-in point once; the opening is recorded. Otherwise only the location status is shown. Approve, or Return the regularisation with a reason.

Requests touching a month that has been exported for payroll cannot be decided until a partner reopens the month ().

Export a month for payroll

Export a month's attendance and leave days (never amounts) as CSV and Excel for payroll. The export closes the month; a partner can reopen it with a reason.

Payroll export gives payroll the days for each member: present, half days, leave and loss of pay. It holds days only, never an amount. HR / Office, partners and the owner can export; managers cannot.

Steps

  1. Under Export a month enter the Month (YYYY-MM) and check the preview counts.
  2. Export and confirm it's you. You get a CSV and an Excel file.

The export closes the month (for its branch, or the whole firm). While closed, leave and attendance changes touching that month are refused, so payroll's figures stay true.

To allow changes again, a partner chooses Reopen the month and gives a reason of at least 10 characters. The next export of that month marks the Changed rows. Only the latest closed export can be reopened.

Joiner and leaver checklists

Checklists for members who join, move or leave. Automatic items close themselves; offboarding ends access on the last working day and can hand over named approvals.

Joiners and leavers shows the checklists of the members in your scope, by name: open, closed and cancelled.

Items

  • Automatic items close themselves when the platform sees the work done, for example the member has no access left or no open tasks.
  • Manual items are marked done by the person responsible.
  • Only partners can waive an item, with a reason of at least 10 characters. The deactivation check can never be waived.

A checklist closes when every required item is done, checked or waived.

Offboard a member

Steps

  1. Choose Offboard a member and pick the Member.
  2. Enter the Last working day (YYYY-MM-DD) and, if useful, who should take over their named approvals (Hand named approvals to).
  3. Confirm. The owner or a partner confirms it's them.

The leaver checklist opens and the member's access ends at the end of the last working day (23:59:59 India time).

Templates

Checklist managers copy the starter templates under Templates, adjust them and activate their own. A retired template is no longer used for new checklists.

Record your skills

Set your own level (0 to 4) for each skill in the firm's catalogue, and see how many members are at each level. Leads confirm levels; there are no scores or rankings.

Skills has three parts.

  • My skills: choose your level from 0 to 4 for each skill and choose Save my levels.
  • Coverage: for each skill, how many members are at each level, and Members at level 3 or 4 (by name). Never a score or a rank.
  • The firm's catalogue. If there is none yet, HR / Office chooses Copy the starter catalogue and adjusts it.

Leads confirm the levels of members in their scope. Nobody confirms their own level.

Record your time and submit the week

Run a timer or log time by hand against an engagement or an internal category, check the week grid, then submit the week for approval. Submitted and approved weeks are locked.

My time has three parts: the timer bar, the week grid and the submit bar.

Use the timer

Choose what you are working on (Client work on an engagement or an internal category) and choose Start timer. The server keeps the time, so it carries on if you close the browser. One timer runs at a time: starting another either stops the first or is refused, as your firm chose. Choose Stop timer when you finish.

A timer left running stops itself at the firm's maximum and the entry is marked Stopped at the maximum for you to check.

Log time by hand

Steps

  1. Choose Log time.
  2. Pick the Date and the Work: an engagement (the client is filled in for you) or an internal category.
  3. Enter the Time as h:mm (for example 1:30) or as minutes, add a note if useful, and Save.

A day above the firm's warning level saves with "That day is long — check it". A day can never go above 24 hours. Delete a wrong entry from the grid while the week is a draft.

Submit the week

When the week is complete, choose Submit week. The bar may warn you, for example when the week is below the firm's expected minimum; you can still submit. Stop any running timer first.

A submitted week waits for your approver and its entries are locked. If it is returned, it comes back as a draft with the approver's reason; correct it and submit again. An approved week can be reopened only by an approver, with a reason, and not once its time has been billed.

The article register

Register articles, follow each one's training period, record events, keep the stipend schedule, confirm the training log and plan exams. Results under ICAI rules still in review are labelled.

Article register lists the article records you may see, by name, with the expected completion date, excess leave and open stipend findings. HR / Office and partners register articles.

Warning

The articleship rules used here are in review until a CA confirms them. Every result that depends on them is labelled "rules not yet verified". Check figures against the ICAI regulations and ask your principal before relying on them.

Register an article

Steps

  1. Choose Register an article.
  2. Pick the Article (a member who holds the Article role) and the Principal (an active partner or the owner, not the article).
  3. Enter the ICAI student registration number, the Scheme, the City class and the Commencement (YYYY-MM-DD).
  4. Save.

A member can have only one open record at a time.

An article's page

  • Training period: required days, served days, leave counted and entitlement, excess leave, gaps and the expected completion, with the rule-set version used.
  • Events: the timeline (for example suspension, resumption, transfer out, completion). Record an event with its date; events are never edited. To correct one, void it with a reason; it stays in the log. The page names the ICAI form that goes with an event.
  • Stipend: the monthly amounts, shown masked until revealed (with confirming it's you). Set the stipend from a month. An amount below the rule set's minimum warns and raises a task, or is refused if your firm chose that.
  • Training log: approved time by area, month by month. The principal confirms past months.
  • Exam plan: the planned attempt and whether the article is eligible for it.

Work patterns and the holiday list

Work patterns set the hours expected on each weekday and the Saturday rule; the holiday list sets the firm's holidays for a year, for all branches or one.

Leave day counts, attendance and capacity all use the member's work pattern and the firm's holiday list. HR / Office keeps both on Work patterns and holidays.

Work patterns

A work pattern gives the hours for each day (Hours Mon–Sun) and the Saturdays rule: every Saturday as the pattern says, 2nd and 4th Saturday off, 1st and 3rd Saturday off, or all Saturdays off. Choose New work pattern, set the hours and the Effective from date, and save. A later change takes effect from its own date, so past days are not changed. One pattern is the firm's Default.

Holidays

The list is for a year and applies to all branches or one branch. You can:

  • import a branch's published holidays (national plus the branch's state), when the page offers it for the chosen branch. The import confirms the year: a later change to the published list never alters past days silently;
  • Add a firm holiday with its Date, Name and branch (empty means all branches).

Holidays are added, not edited. Check the list before the year starts, because leave day counts depend on it.

See team attendance and who is away

Each member of your people scope by name, with each day's attendance status for a week and who is away. No locations, consents or rankings are shown.

Team attendance and leave shows, for a week, the members of your people scope by name with each day's attendance status, and Away this week.

  • People who may approve leave see the leave type; others see only Away.
  • Nobody sees a location, a consent choice or a ranking here. The page says "Attendance recorded, not performance".
  • If leave is not switched on for the firm, the page says so.

See your team's recorded time

The members of your people scope for a week, listed by name, with their recorded time and whether each week is not submitted, pending approval or approved.

Team time shows, for the week you choose, each member of your people scope with the time they recorded and the state of their week: not submitted, pending approval or approved.

People are listed by name only. There is no sort, rank, "top" or "bottom", and the page says "Time recorded, not performance". Members who have left show as Former member.

Export CSV gives the same people, in the same order, for use elsewhere. It asks you to confirm it's you.